At the beginning of its establishment, the Global Metal Processing Exhibition launched a processing competition during the exhibition in order to attract major manufacturers.

The competition is very funded.

Increase year by year.

By this year, the prize money for the first place in the competition has reached an astonishing 50 million.

This undoubtedly attracted real-life manufacturers.

For example, many foreign manufacturers participated in the global metal processing exhibition held by Oriental in order to gain popularity and make a fortune.

Every time a manufacturer who gets a ranking will make a fortune in this exhibition, and of course, a large number of orders will be given priority to these manufacturers who get a ranking.

The existence of this competition has indeed been successful, making the Global Metal Processing Exhibition one of the most influential exhibitions in the world.

The most attractive part of the exhibition is this metal processing competition.

All major manufacturers will participate.

Countless enthusiasts will observe on the spot that a piece of metal is finally processed into a rare metal artwork.

This is a feast for fans.

Ultra-high precision and super-complex processing are really too impactful for men.

"Look, the competition processed products are out."

Someone exclaimed.

Anyone who has participated in the exhibition knows that the exhibition will start competition at 9:30.

The competition location is at the booths of each manufacturer.

The booth of the manufacturer with the product will become a small processing site.

The exhibition party will send the metal that needs to be processed to the manufacturer's booth according to the form of registration and processing by major manufacturers.

At this time, it is the process of major manufacturers choosing processed products.

A ranking list appeared on the screen of the exhibition.

The processed products listed above are arranged in sequence from the most difficult to the easiest.

Each manufacturer can choose any processing product, and the points will be calculated depending on the difficulty, complexity and completion of the processing.

The manufacturer with the highest points is the first place.

Another type is free processed products. It does not limit the product. As long as you can process it, there will be judges who will rate the processed product. The score is also in the above way.

As soon as the processing list was released, it immediately caused heated discussion.

Because every piece of the processed product on this processing list is not simple.

The first one is to process a reduced version of the submarine propeller blade.

Very few instructions.

But often the fewer words, the more difficult it is to prove it.

Everyone knows that the blades of submarine propellers are not just about to be processed into shapes. They involve materials and processing accuracy, as well as various hidden data indicators. It can be said that the technical content of submarine propellers is far beyond the imagination of ordinary people.

For submarines, the blades of the propeller are also the most difficult part to solve.

In the following list, there are various processing products that are difficult to process machine tools.

"It's strange. There were no such difficult processed products in previous years, and it seems different this year."

"Yes, you see, the organizer actually released the blades of the submarine propeller. This technical difficulty is not ordinary."

"The first blade is enough to make most manufacturers retreat from difficulties, and they need to go to the five-axis linkage machining center."

"The second processed product also requires a five-axis linkage machining center."

"It should be said that the top ten are not simple, and they all have strict requirements on speed and accuracy."

Among the processed products, everything can be included from impellers, blades, marine propellers, to heavy generator rotors, turbine rotors, large diesel engine crankshafts, etc. This type can be almost only completed through a five-axis linkage machining center.

In fact, domestic manufacturers also have this ability.

But efficiency and accuracy are really disappointing.

Putting aside these, such as box parts, complex curved surfaces, special shape parts, disc covers and plate parts and special processing, etc., are on the list.

What can be used for competition is definitely not a simple processed product.

"Hiss, I feel like this is hell's level this year."

"In my opinion, the current manufacturers are probably less than one-third of them who dare to participate in the competition."

Many of the manufacturers at this exhibition are low-end products, but do not have these processing capabilities.

For the competition, this time, it suddenly increased the difficulty, which made them have to stare at me.

Seeing the difficulty of processing this time, Xiao Wang's eyebrows frowned.

Of course, the most precise five-axis linkage machining center cannot be moved to Dongfang. This time he brought only three-axis and four-axis products, which means that Shimakawa Heavy Industry cannot process them like blades.

"Baga, the Orientals are very bad."

"But it can't hurt us."

"The machining is more about high precision, and the current machine tools are capable enough."

The mustache sneered.

Orientals think it is difficult to get them like this?

The most attractive thing in the entire exhibition is Mammoth Heavy Industry.

The machine named ultra-fast metal engraving machine by Mammoth Heavy Industry is too shocking to be processed with a robotic arm? This accuracy is definitely so thick that there are no friends. Everyone wants to know how Mammoth Heavy Industry will pull off the cow that was blown out.

Many people gathered around Mammoth Heavy Industry and stayed together without dispersing.

Some internet celebrities even appeared here, holding their mobile phones and broadcasting live.

This kind of thing that can be used to get rid of the traffic of Mammoth Heavy Industry is in vain. If you just mark it, countless people will come in to watch the live broadcast.

Zhao Siya and Zhou Ning both have seen super fast metal engraving machines, but this is just processing curbs and there is no precision. But what is listed above now is either blades or curved parts. None of them is extremely complex, and it has extremely high requirements for accuracy.

Super fast metal engraving function?

Their eyes were on Zhou Qiang, and they wanted to speak but stopped.

Zhou Qiang kept smiling.

Who is Jia Zhengchu?

A mechanic master is a treasure in any country.

Will such a person make such a low-level mistake?

Although Zhou Qiang had never seen other parts processed by ultra-fast metal engraving machines, in the apocalypse, survivors of settlements used this engraving machine to complete the processing of gun parts, creating guns that were reliable and comparable to military products.

It is not difficult to see from this point that the super fast metal engraving machine is very awesome.

"Don't worry, Lao Jia knows what he is doing."

And Jia Zhengchu was looking up at the list that appeared on the screen.

After a few glances, he shook his head.

A reporter immediately captured Jia Zhengchu's expression. His eyes lit up and immediately rushed to Jia Zhengchu with a long spear and cannon. He interviewed: "Manager Jia, are you going to give up and think you can't process these parts?"

In his opinion, Jia Zhengchu must have realized that the difficulty of these parts is not enough to be processed.

Jia Zhengchu gave the reporter a look of contempt and said, "What are your eyes?"

“When did I say I gave up?”

"But you shook your head and sighed." The reporter expressed his point without hesitation.

Jia Zhengchu shook his head and said, "You are wrong. I shake my head because I think these parts are too simple. With this difficulty, it is not even a challenge. It is just the nature of the general processing."

"ah……"

The reporter was stunned.

Is there such a arrogant person?

But what he wants is controversy. No matter how Jia Zhengchu answers, it represents traffic to him. He immediately said: "You mean, aren't these challenges in front of this ultra-fast metal engraving machine of Mammoth Heavy Industry?"

“Yes, these parts are too simple.”

"And this accuracy requirement is too technical."

“In my opinion, is it more challenging to increase the accuracy level by one level?”

Jia Zhengchu nodded with a smile.

This interview appeared on the live broadcast as soon as possible.

How many people were stunned.

Does this old man know what he is talking about?
To be continued...