The sword breaks through the sky.

Countless sword shadows stabbed directly like a ray of light.

Kill Yun Cang with the sword!

The phantom of the magic figure of the giant spirit man in Mount Taihua, and only half of his body remained, he was killed by the sword of the Qifeng Sword Hero.

His body suddenly soared into the air. The swordsman of the Qifeng Sword was like cold wind. He took his sword with the flow, fell in an instant, and returned in an instant.

Then, without even looking at the young man Yang Shengzi, he pointed at the sword alone, and the sword Ningkong followed his footsteps and left.

It was not until the great swordsman left that the girl Yingzi, who was blocked by the whirlwind, and the full moon scimitar, fell down to the ground.

"This person is not a little faster than my knife." Wen Bozhe said passionately to Yang Shengzi.

"Although his sword is extremely fast, Brother Wen's sword is also good, so you are leaving now?" Yang Shengzi stepped forward and looked at the full moon scimitar Wen Bozhe and the little girl's injuries. It was not serious, so he simply tried to both sides.

Give praise.

After saying that, Wen Bozhe nodded his head lightly. Seeing this scene, Yingzi, a girl who had been holding the lotus seeds of Tianshan Snow Lotus in her mouth, ran over, took out the lotus seeds in her mouth, and handed them to Yuanyue.

Scimitar Weinber fold.

There are two snow lotus in Tianshan Mountain.

One is the lotus leaf of the snow lotus, which was stuffed into the mouth of the girl Yingzi by Yang Shengzi. The lotus leaf was eaten clean by the wild girl.

In addition, the lotus seeds of this snow lotus are said to have the effect of resurrection. They do not know whether it is true or false, but they must be used in life-saving ways to save lives, and this cannot be fake.

"There will be Brother Qiyang in the future. The green mountains will not change, and the green water will flow forever. I will meet again if I have the fate." The full moon scimitar Wen Bo admired and praised the people in front of him, and had an indescribable brotherly friendship. If he hadn't wanted to save others, he would not have thought about it.

Maybe he will follow him all the way west, and even if he persuades him, he must protect him.

The full moon scimitar, Wen Bozhe, took the lotus seeds of Tianshan Snow Lotus, and only half of the glacier was left. He was about to return.

Yang Shengzi wanted to continue traveling westward, and the route to descending the glacier was exactly the opposite of that of Wen Bozhe.

With his eyes as sharp as a torch, Yang Shengzi quietly looked at the direction where the full moon scimitar Wen Bob left. After a long time, he came to his senses and took the little girl's hand and continued to travel west.

He is no longer the young man he used to be, at least he is already an old uncle in his mood.

The wild girl Yingzi is still so wild, and has not changed at all. I don’t know if she promised peace to Hero Yang. I would rather not grow tall for the rest of her life or a curse. It seems that the girl Yingzi is trapped in the dark.

I don’t know whether it’s happy or sad.

One big and one small, limping on their journey again, is also their journey.

...

After a while, Yang Shengzi was touching his chest, which made Yingzi, the girl beside him, come to the mood. She hurriedly reached out to touch Yang Daxia's chest, touched left and right, and was stunned.

If you haven't found out a name, can you tell a lie?

"I can't touch Yang Daxia, is that old villain lying?" the little girl touched Yang Daxia's chest and asked."

"It's impossible to lie. Although I didn't feel that there was a Ding Sword Furnace deep in my heart, since it was a great swordsman who said, we should believe him."

He patted the little girl on the shoulder and Yang Shengzi chuckled

(This chapter is not finished, please turn the page)

Reply, responded.

Speaking of sword furnace, Yang Shengzi was completely unaware. He only knew that there was a sword in his heart that was thriving. He might appear in the near future. After listening to the words of Jifeng Sword Hero, how could he think of his heart sword?

It took thousands of years to polish it well. I guess the day when the Heart Sword appears even if I die.

I really don’t understand the tricks, so it’s not his fault. He is not a blacksmith or a sword-casting master. How could he know these things?

If you want to create a long sword to form until it can appear on the battlefield to kill enemies, there are many forging processes.

Prepare tools first.

As for the famous iron shop in western Juezhou, it is another matter whether to build a sword or not. You must first prepare the tools to build a sword before you can continue the next move. Without these, you can talk about it on paper.

The main tools used to make swords are sword furnaces, which are stoves. They are burning very strongly. The purpose is to place the fine iron on the stove and knock it again and again to form a sword blade.

There are also charcoal fires that can be burned, bellows that can be blown and pulled, long-handled iron pliers, iron piers and hammers.

Some tools are complete with long-handled iron slashing, slashing, files, scrapers, slashing, stools, sashes, etc.

Look, these dazzling tools alone require a lot of effort to obtain them. Therefore, not every iron shop can collect all the sword-making tools above. It must be a rich or famous sword-making master who has taken on the top title.

, there is naturally no shortage of these tools.

In addition, the prototype of a sword body made with tools and without tools is very different. In short, the tools are neat and everything goes well, and the tools are not in line with each other, and the results are half the result with twice the effort.

The next step is to choose the materials. Even if you want to create an ordinary iron sword, you must use good steel to cast it. Only such a sword will be extremely sharp and can kill people!

First, use the best fine iron to put it in the sword furnace, first preheat it and pour some water on it, then heat and beat it repeatedly, and then finally forge a semi-finished sword blank.

The next step is an annealing, which is an extremely complex forging process. After the sword embryo is formed and solidified, it will wait for it to initially turn into a sword strip.

Then heat the formed sword bar evenly to a high temperature of 800 degrees, tap gently to remove the crystals in the shape of bark on the sword, and then put them in a cool place to slowly turn cold by itself.

The ordinary blacksmith cannot do the trick. Only experienced veterans can completely remove the sword embryo from fire.

After annealing and cooling, the sword is hit hard with a small hammer prepared on the shop to make the sword straight and the back of the mouth symmetrical. After thousands of hammers, the sword body will be smooth and will appear blue light. This sword casting process is called cold

Forged.

Therefore, most of the strange-shaped swords seen on the market come from this sword-casting process.

If there is an extremely picky person, it is not necessary to want a sword shape of this and that. As long as the price is available, it is not uncommon for the master of sword making to even coldly forge a flower. The guest is the financial owner.

Meet all requirements of the funder.

The premise is that the sword body and the back of the sword can be symmetrical, which will test the sword-making master's real skill. If the plastic surgery is not good, his reputation will be discouraged.

Since ancient times, famous swords have often regarded themselves as strange and strange shapes.

However, it must be beautiful and beautiful,

(This chapter is not finished, please turn the page)

It is difficult to get a sharp sword blade and a lot of money.

After the cold forging, place the beaten sword body on the rough and flat stone surface and rub it.

Rub and rub, just press the cold forged sword strips to the ground to rub.

During the friction process, the smoothing marks will be left, so that the creation will begin.

Sword is an extremely important sword-making process. Use a file to file the scratched marks smoothly, then use a thin edge to open the edge. After the edge is opened, use a fine file to repair the edge smoothly and neatly.

If I thought this would be over, I would really starve the master to death and my little apprentice to death.

It's not that easy to cast a complete murder sword.

After finishing the above, I now have to apply mud on the blade of the iron sword, also known as applying soil and burning blades.

Mash several materials into powder, use eaves water, or mix them with clean rain water to form a sticky shape, apply it to the sword body, and observe the thickness of the blade and the soil part of the sword ridge, if not

Just like, it’s over, the efforts I made before are useless, and I will recreate it!

After applying the soil, put the sword strip in the shade, and saw that the wind was about to blow it dry and then quenched it non-stop.

The quenching of the sword is the second life given to the sword. If there is a slight mistake in the quenching process, the efforts of dozens of days before will be in vain when the sword enters the water.

Not only that, the quenched water is also very particular. It must be the spring water in the stone, the sweet and clearest ones are the best.

After using this water quenching and grinding, the sword body will be like ice, clear and bone-permeable, and the cold air will be impressed.

Then use the screened fine pine charcoal fire to sprinkle evenly on the sword and heat it to the appropriate temperature.

Different fine irons correspond to different temperatures.

Then, quickly insert it into the spring water. Quenching will test the sword-making master's skills. After cold forging, it will also be cold forging again, just because the sword body after quenching will be severely deformed or even bent, very hard and tough, and it is also tough

Full.

Therefore, this creates a lot of trouble for the formation of the sword behind.

The second cold forging requires a hammer. A slight deviation will cause the sword body to break or collapse.

Many master sword-casting masters will use wooden hammers instead and place the sword body on the hardwood to hit it.

During the secondary cold forging process, a slight breakage will be declared as failure.

The sword that has gone through layers of tests but has not been scrapped is the return of the king. The master of sword making will first grind it, and use great strength to grind it on the grinding stone to remove the thick hard shell left during quenching.

Grind again! This time you need to grind it carefully, until it reaches 300 mesh, then 500 mesh, 800 mesh, 1,000 mesh... until it reaches 3,000 mesh, and then grind it with four or five thousand mesh.

Rub the stone with your own hands until the steel is clamped on the sword body is obvious, the texture is clear, and there is a mirror effect. The sharpening process of sword is extremely long, and it requires a quiet mind to reach the state of unity.

This is called sharpening the sword!

This is like Yang Shengzi sharpening a sword in his heart, but one is to use his hands to grind the rough stone.

The other is to keep grinding the heart back and forth in Yang Shengzi's heart, and his sword is also his heart. Sharpening the heart is called sharpening the sword!

so.

The sword furnace is brewing the sword embryo.

Sharpen the sword and make the sword heart.

The sharp edge of the sword comes from sharpening, and the fragrance of plum blossoms comes from the bitter cold.

(End of this chapter)

7017k
Chapter completed!