Good news came from the steel plant here. From the Metallurgical Bureau, Director Wang Junhong also called and said that two new alloys would be tested on site in the afternoon and asked Yang Xiaotao if he wanted to check it out.

Yang Xiaotao thought of a lot of things going on in the machinery factory, so he didn't agree, but he was very concerned about the result.

When it was almost time to get off work, good news finally came from the metallurgy department. Two new alloys had been produced.

The news spread quickly and caused a sensation.

Not only did the First Aircraft Department get the news, it was the first to call for verification, but the Third Aircraft Department and the Seventh Aircraft Department followed closely behind, especially the production of titanium alloys. As an important alloy material on aircraft, the Third Aircraft Department was researching a new aircraft.

It is even more urgently needed.

Zhang Lao from the Third Machinery Department called the machinery factory directly and explained that the share of other alloys could be less, but titanium alloys should be more, or even steel could be exchanged.

Yang Xiaotao did not refuse.

Of course, with these three alloys, the plan to upgrade Venus machine tools should also be put on the agenda.

The drawings that Yang Xiaotao gave everyone before were copied from Alphat, but the machine tool was much smaller and could process ordinary work parts. However, it was not enough to process the production parts of large machine tools.

The reason why he gave it to everyone was to let the people in the R&D department understand the design ideas and not copy them directly.

Machinery shops need large machine tools.

Of course, after the large machine tools are built, small machine tools can also be tried to be produced.

Now that the design drawings of small machine tools are available, are large machine tools still far behind?

For Yang Xiaotao, who has already understood the design and structure, this is just a matter of one night.

Before getting off work, Yang Xiaotao summoned the people from the R&D department and held a small meeting.

The only purpose is to start preparing for semi-automatic machine tools tomorrow.

Everyone was very excited after hearing this.

This matter has been bothering me for almost half a year, and several of the failures were inexplicable.

It wasn't until Yang Xiaotao gave them the drawings and pointed out the problem later that they realized what was missing.

Now that the problem of materials has been solved, the next step is to do a big job.

Yang Youning and Liu Huaimin were also excited after receiving the news.

Yang Youning was walking back and forth excitedly in the office, which made Secretary Xiaoqiang at the door very strange. His factory director always did something unexpected during this time.

Liu Huaimin was also excited, but he could restrain himself. He just told Mr. Xia the news and said nothing more.

Back in the courtyard, Yang Xiaotao had dinner and then plunged into the study.

I took out the machine tool information that I had previously compiled and started designing it according to new ideas.

The wind at night is a bit cool, and it will be December soon, so I need to save some coal at home.

In the middle of the night, Yang Xiaotao finally completed the drawing design.

In an instant, the long-lost system prompt sounded again.

"Ding! Congratulations to the host for successfully designing a semi-automatic advanced machine tool. The system evaluation is excellent - medium."

"Ding! Congratulations to the host for earning 5000 credits."

Two voices sounded like sounds of nature.

Opening the window, cold wind poured into the room, but it could not extinguish Yang Xiaotao's fiery heart.

The credits suddenly increased by 5,000, and the total score exceeded 12,000. This can completely upgrade the sub-skills Mechanical Proficiency and Steelmaking Proficiency.

Either of these two is worth 10,000 credits.

But each one can bring new gains.

"Which one should I choose?"

The cold wind blew by, and Yang Xiaotao shivered, not knowing what to choose.

The next day, when Yang Xiaotao came to the machinery factory, people from the R&D department were already waiting in the warehouse.

This is where the first Daystar was born, so they wanted to put the upgrades here too.

Yang Xiaotao doesn't have any opinion on this, it's the same everywhere.

After a while, Liu Huaimin walked in wearing a military coat, followed by Yang Youning and Chen Gong. Yang Xiaotao stepped forward to say hello and then entered the venue.

On the side, Lou Xiao'e handed the drawings to Guan Zhiyong and others.

Everyone took the drawing, thinking it was the one Yang Xiaotao showed them last time, but they didn't expect that they were given another copy.

"Everyone, take a look. This is an upgraded version of the original drawing, which is more suitable for our machinery factory."

"Once you get familiar with it, you can proceed according to the division of labor."

Yang Xiaotao stood aside and flexed his hands and feet, obviously he was going to end this time too.

Liu Daming, Zhou Hong and others also looked serious when they met.

Yang Xiaotao even ended up personally, which shows how difficult this time is.

"Old Liu, it should be stable now."

Yang Youning was smoking a cigarette, smiling without closing the corners of his mouth.

"No, this guy has to go to the end personally. It's hard even if he doesn't succeed."

Chen Gong also smiled.

Liu Huaimin nodded, "Old Chen, let the canteen be ready."

"I've told you this a long time ago. If it's done, I guess Mr. Huang and the others can come too."

Several people nodded together after listening.

The task of improving machine tools has been promulgated in China for a long time.

Several capable factories all failed.
Chapter completed!