Defenses can not do without!

After finishing work the next morning, I brought Zhou Peng over after dinner.

When I arrived, I met Wang Hao who was patrolling outside.

The two of them met and said hello, but they didn't say anything, and they understood each other tacitly.

When he came to the door and saw that the mark was still there, Yang Xiaotao went in and continued to dismantle the machine.

In the following days, Yang Xiaotao finished his work in the morning, and then came to the warehouse with Zhou Peng to work in the afternoon.

Sometimes Wang Guodong came back for a visit, and Xu Yuanshan would pass by once or twice, but he never bothered Yang Xiaotao.

However, when the two of them looked at the nearly dismantled steel rolling mill, their hearts felt as if they were being pinched by fists, and they did not dare to breathe.

In this way, by the end of the month, Yang Xiaotao was already familiar with the structure of this rolling mill.

I also thought about it simply, thinking that with mechanical proficiency and drawings, I could understand these machines.

But in actual operation, it is different from the similar one.

Just like the components in front of me, they are inconspicuous on the rolling mill. Even the drawings are just a few simple lines. When it is disassembled, a lot of effort is wasted. It cannot be done according to the drawings.

It was not until Yang Xiaotao used the faulty scanning glasses that he discovered that there was a linkage between this part of the workpiece and another piece. If he wanted to remove it, both pieces must be removed at the same time.

If there is no one who understands this, I will probably have to dismantle it violently.

Of course, the consequence is that it cannot be restored to the original state during assembly.

Even before the machine was repaired, I still didn’t know what went wrong.

As time progresses, it has come to the end of July.

Over the past few days, Yang Xiaotao became more and more familiar with the internal structure of the rolling mill. He even felt that his level 2 mechanical proficiency was becoming more and more proficient in these days. Just like what was described in martial arts novels, all the abilities in his body were fully realized at this moment.

Absorbed.

Great skill!

This has also benefited Yang Xiaotao a lot. As long as the structure of this rolling mill is understood thoroughly, other rolling mills will not be a problem if they are similar.

At this moment, Yang Xiaotao felt refreshed and energetic.

Compared to Yang Xiaotao who felt good about himself, Zhou Peng who witnessed Yang Xiaotao becoming more and more familiar with him was shocked!

Zhou Peng was shocked when Yang Xiaotao opened it for the first time.

Fortunately, Deputy Factory Director Xu and the Director were together, so he thought it was the task arranged by these two people.

If he knew that this was Yang Xiaotao's initiative, he would probably be even more shocked.

Of course, Zhou Peng also learned a lot while following Yang Xiaotao. At least he had an understanding of how to disassemble it, which made him even more grateful to Yang Xiaotao.

If Yang Xiaotao hadn't strictly stated that he would not accept a disciple, he would have kowtowed to become his disciple.

Well, I guess there are many such people.

"What are you doing standing still? Bring me the pliers!"

Zhou Peng was woken up by Yang Xiaotao when he was giving birth, and Zhou Peng quickly handed over a pair of pliers.

At this time, Yang Xiaotao put the notebook aside, took the pliers and began to twist the screws.

This is where the damage to the machine occurred.

With a click, a broken part was taken off by Yang Xiaotao.

Yang Xiaotao took off his glasses and looked at them carefully.

The component in front of me is disconnected from the middle. Looking at the cracked joint, it is probably caused by an external impact.

And in this area, it is not caused once or twice. It is probably caused by irregular operations accumulated over a long period of time.

Yang Xiaotao took out the parts and searched inside the rolling mill for a while before finally putting the complete parts together.

"Brother Tao, what is this?"

"What else can there be, just bad parts!"

Yang Xiaotao didn't say much and asked Zhou Peng to put the broken parts farther away.

"This thing is really not simple."

Looking at the things he had put together, Yang Xiaotao thought, he had almost caught up with the seventh-level artifact.

But these are just trivial matters, he can handle them all by himself.

Finding the crux of the problem is more than half of the success.

Just replace the parts and assemble the rolling mill, and the task is completed.

But will Yang Xiaotao miss this learning opportunity?

You finally get the chance to dismantle a machine for exercise, how could you not seize the opportunity?

So Yang Xiaotao continued the dismantling work.

Bada

Bada

Components were constantly being removed and handed over to Zhou Peng for placement in an orderly manner.

At the same time, Yang Xiaotao was writing and drawing in a notebook, recording the specific locations, and comparing them with the drawings when he went back in the evening.

Ding dong

A section of the bronze plate was pulled out, revealing the dense circuits inside.

Yang Xiaotao quickly put down the pliers, picked up the notebook and started recording.

The links of these circuits are much clearer than those on the drawings, and are easier to remember.

As long as you understand these circuit boards and wires thoroughly, repairing other rolling mills is not a problem.

In this way, time passed and it was another busy day. Yang Xiaotao twisted his neck and left with Zhou Peng.
Chapter completed!