After being humble, everyone got to the point.

Soon, Yang Xiaotao brought the drawings of the punch, and several masters immediately looked forward to check it, and soon they started arguing.

Yang Youning and Liu Huaimin, who were beside him, looked at each other and showed a successful smile.

In the warehouse.

The operation of Qimingxing has stopped, but the debate among the crowd has continued.

Yang Xiaotao was surrounded by the middle and kept explaining to several people. Liu Daming and others joined the discussion when they met.

It is not easy to design a punch press these days, that is, Yang Xiaotao can use error corrections to continuously correct the bugs in the card system. Of course, some are expensive, but shortcuts can be found.

As for others, if you want to design a machine tool, you need not only systematic learning, but also certain experience. Therefore, when you see the drawings, most people have doubts about the design.

If you don’t understand, ask, and the masters don’t care at all.

Several people were discussing the drawings one by one in the warehouse, and Chen Bin and others joined in and calculated the data.

Although I don’t know how Yang Xiaotao designed the drawings, in their calculations, these data are consistent with the design, and I admire Yang Xiaotao’s drawing level even more.

Several people discussed it and almost left the others aside.

Liu Huaimin and Yang Youning have long been accustomed to this situation. When Yang Xiaotao was doing this, they often waited aside for half a day.

Xiaoqiang and others quickly found a stool, not only for Yang Youning and the others to sit down, but also Yang Xiaotao and the others to sit down. After a fierce discussion, they continued to drink water.

When Mr. Xia got off to the warehouse, he saw Master Zhou, who was eager to do practical inspections and check the performance of the machine tool through practical inspections.

It is also directly proposed that the punching machine should be made and the accuracy of the machine tool and the situation of the punching machine are also tested.

Mr. Xia was confused by these old guys. Although he had set the tone of testing and knew that he would make a punch, he didn't expect that the first person he brought was the one he brought.

He looked back at Yang Youning in confusion. Seeing him looking over, he immediately turned around and talked to Liu Huaimin, and looked at Yang Xiaotao again. The kid even drank sips with a water cup. The speed was slower than a turtle.

I immediately understood that these guys had put their ideas on these masters.

However, this is also a good thing.

The rolling mill gradually became his trump card. To strengthen the rolling mill’s capabilities, it is not only necessary to have machines, but also people.

Of course, he can only say a word whether he can stay or not. The important thing is that the rolling mill keeps the hearts of others.

At this moment, Mr. Xia agreed to the actual test.

Then the rolling mill immediately sent the prepared materials to the warehouse. Yang Xiaotao led people to explain to several masters with drawings, and at the same time, he drew several people from the technical department to follow the master.

These people are senior fitters, and their purpose is self-evident.

Scream

Squeak

Fortunately, there is no shortage of materials used in the punching machine, and Yang Xiaotao and others are just used to make it as ordinary machine tools.

Even so, Master Zhou, who is responsible for controlling the machine tool, still sighed when he processed the step-by-step parts from the drawings.

First of all, this machine tool is very useful, much better than the ones in their factory, with higher accuracy and time-saving.

Secondly, this design is so good that even the errors are taken into account. As long as you do as required, it is absolutely correct.

And these two things are actually related to Yang Xiaotao, that's not just about feeling.

There is also a bit of admiration.

Looking at the young man who was guiding them on the side, he knew that this man was still a level 8 fitter master, and the pride of his and others was nothing in front of others.

"Master Yang, how did this data be designed..."

"This is a slant of fifty degrees..."

Yang Xiaotao was doing a demonstration aside. The master in charge of the work quickly paid attention to it, processed the parts, and handed them over to Liu Daming and the others.

Two days passed quietly in the hot work of everyone.

In the past two days, Liu Huaimin and Liu Ruichao have something to do, and only Mr. Xia is left at the scene. Even so, the protection level of the steel rolling mill has been increased by several levels.

As for those masters, they were fascinated by the time they came early and the time they went back late every day.

Of course, Yang Xiaotao and the others had to accompany him throughout the whole process, and they were not idle either.

During this period, Yang Xiaotao and Wang Dahai called twice. If nothing unexpected happens, Liu Dehui also needs a punch. In addition, there is also the need for a milling machine. Yang Xiaotao can only say that he is still in the design and will definitely match it if he has it in the future.

It was during these two days that due to Wang Dahai's intervention, the order for the purchase of punches was sent to Liu Huaimin's table. Yang Xiaotao had already been angry with him about this matter, and Liu Huaimin had no reason not to allow it.

Therefore, these two orders became the earliest machine tool business for the rolling mill.

At noon on the third day, the people who were resting in the steel mill suddenly heard someone shouting again, and then they saw many people running towards the warehouse area.

There were many people watching the fun, so I quickly followed, and the people in the security department didn't care, just maintained order.

Soon, a burst of cheers came from the warehouse, followed by violent applause.

After asking someone, I found out that it was made from the rolling mill’s machine tool, and two were made at a time.

I had been promoting it inside the steel rolling mill before, and recently I came to review it by the high-ranking officials. Now, I heard about this momentum, it should be done.

So, the people coming from behind also joined the wave of cheering.

In the warehouse, applause was still ringing, but everyone's eyes were placed in the middle.

There, two machine tools, one large and one small, were lying quietly on the ground.

The smaller one is the punch that Yang Xiaotao just assembled.

The first punching machine produced by the rolling mill.

I saw a bunch of masters watching a machine tool about one meter long, half wide and one and a half meters high in tears.

At this time, a pot lid and pot body appeared on Liu Daming's hand again. He closed it with a whisper, held it in his hand and weighed it, and was very happy.

Aside from them, Old Xia held Yang Xiaotao's hand with excitement, not caring about the putty on Yang Xiaotao's hand at all.

"Okay, great! Great!"

A few simple words are not repeated in Xia Lao's mouth.

Yang Youning even hugged Chen Gong.

The punch was developed and started moving.

This means that the Qiming Star machine tool has been officially completed and the task has been completed.

Master Zhou looked at the pot body that was easily pressed out under the influence of the model, and raised his hand and applauded vigorously.

Smack~~

Outside the warehouse, the director of the publicity department who received the notice immediately asked someone to light firecrackers, and big red debris spread all over the floor.

"Thanks for your hard work!"

"Fortunately!"

Mr. Xia shook hands with all the people involved in the project. At this moment, he knew that Qi Mingxing had become.

On the side, Yang Xiaotao shook hands with Master Zhou.

"Master Zhou, thank you!"

Master Zhou shook his head and was excited.

Seeing the punches in front of him keep running, Yang Xiaotao admires these masters especially.

If they were rubbed by hand, it would be less than half a month to eat. With the help of the machine tool, the time could be reduced by half. With the operation of these masters, the time would become three days.

This is efficiency.

"No, this machine tool is good." Master Zhou also sighed, he had never used such a good machine tool.

"The accuracy of this machine tool makes the parts we make more accurate."

"It can be said that 50% of the machine tool can successfully complete the task this time!"

Yang Xiaowei looked at Qi Mingxing who was taking someone to repair and maintain the situation, and nodded with emotion, "Yes!"

"This is the power of machinery!"

Master Zhou looked at the Qixing star, his eyes were very envious, and then looked at Yang Xiaotao.

"The machine accounts for 50%, and the old guys order 10%, and the remaining 40% are your drawings!"

"In recent years, it's not that no one has made punches, but to be honest, it's not as good as half of this one!"

"Why is the parts not running in well? It will take a short time to get a problem. Or it is because the power is insufficient, and stamping materials are OK. Steel like this is so difficult!"

Yang Xiaotao did not refuse Master Zhou's praise, but just as the applause gradually stopped, he stepped forward and said in a low voice, "Mr. Zhou, we are preparing to design a milling machine."

Then, Master Zhou's eyes lit up.

"Director Xiao Yang, you are going to do the work of our machine tool factory."

Master Zhou smiled, "If you continue like this, you won't give us a way out."

Yang Xiaotao smiled and said, "Mr. Zhou, do you want the drawings of the punching machine?"
To be continued...