The failure of building a factory completely lost his confidence.

He knew very well that even without Zhao Shihao making trouble from it, he wouldn't be able to do the vacuum pump factory.

After Zhou Dalin took over the factory, he scientifically and systematically transformed the factory, which made him know what it means to build a factory. Compared with others, he could only be called a fool.

Just say that workers did not have any standard in the past, but they could use it.

It’s not that Lao Cheng doesn’t want to produce high-quality products, but that workers can’t do it.

If you follow the process requirements on the drawings, no one of the worker’s work is qualified. You can’t waste all the workpieces you have made, what a huge loss?

The workers don’t work either. I work for a day and I will be scrapped. According to the factory regulations, I will have to pay the money. Okay, I will have to pay you money for a day. How can I make such a reason?

Giving up the inspection standards was not Zhao Shihao's idea, but Lao Cheng had no choice but to compromise.

Anyway, the workpiece can be used even when installed on the equipment, so just do it.

It is his idea that he can use it completely destroys the quality awareness of all employees of the vacuum pump factory.

If you don’t do as required, you will work quickly and earn more. Since this is the case, who still cares about the requirements of the drawings?

So the workers said that the human metaphysics of the technical department were not practical at all and could not be done according to the drawings.

Lao Cheng lost confidence in building a factory, not because the order of Northwest Chemical broke the factory's capital chain. He knew what his son-in-law did. He knew that the money in his hand was calculated based on 100 million yuan. If he really had no money, he would be shameless and ask Zhou Dalin for it.

The bank cannot pay the loan, and the bank cannot take it. Besides, the government still has 40% of the shares in it, so it will definitely help him find a way.

The key is that after the capital chain is continued, the factory can continue to operate, but it still cannot produce the qualified products required on the drawings. What's the big deal about this? The more you do, the more you lose!

When Zhou Dalin came over, he felt that Zhou Dalin might not have a way to produce qualified products.

However, in just three days, Zhou Dalin taught him a lesson, what is building a factory?

He started from the milling process and called all the mills to the conference room for a meeting. The technician in charge of drawings and processes in the technical department also came over to discuss whether the drawings are metaphysical and unrealistic?

Those drawings have not existed for a day or two. Since the era of state-owned enterprises, the vacuum pump industry has had national standards, and some standards have even been formulated by water-based vacuum pump factories. This can be seen as the position of water-based vacuum vacuum in this industry at that time.

However, with the reform and development of the development to this day, workers can't work as required by the drawings.

Zhou Dalin first asked two workers who had been working on grinding processes in the state-owned enterprise era. In the past, could they have produced qualified products?

Those two grinders are in their forties, so of course they know that they will definitely be able to do it in the past.

However, in the past, I used to eat big pot meals, and I got my salary at the salary level, and I didn’t care about pieces. It would be so much money to do one piece a day, so I can do it slowly.

It’s not possible now. I can’t even drink soup if I do one piece a day. It’s not that I can’t produce qualified products from now on. Starting from the market economy of state-owned enterprises, I can’t do it by calculating wages based on working hours. Workers have to earn their wages first, which is enough to support their families?

During the meeting, Lao Cheng was there too. At that time, he was still at work and wanted to see how Zhou Dalin managed the factory.

When he heard the two old workers talk about this, he felt that Zhou Dalin had no choice.

According to their statement, if you only do one workpiece this day, how high is the cost of this workpiece? Then every workpiece is done like this, and the quality of the vacuum pump produced is improved, but the cost is more than ten times that of others. Who is willing to buy it?

However, Zhou Dalin's statement surprised him.

"The wages will not increase at all. If the workpieces are done, they must meet the requirements of the drawing process. Whoever thinks you can't do it, let me leave now!"

There was a silence in the conference room.

He held an old yellow newspaper in his hand and his face was cold.

"This is an old newspaper I found in the archives of the state-owned enterprise era in the office building."

He said expressionlessly: "In 1996, it was Linshui Vacuum's own factory report. It said that Liu Daqiang, an external cylindrical grinder in the pump shaft workshop, worked three years in a year, and passed the test every part and was rated as an advanced producer in the entire factory."

Speaking of this, he paused and said, "I have no way to verify the news in this newspaper. However, I found Master Liu Daqiang and told me that in order to evaluate the advanced level, it was a bit exaggerated, but it was true that he did more work with quality and quantity. He could grind twenty pieces a day when he did this pump shaft. Generally, grinders could do ten pieces. That year, in order to complete a batch of export orders, he worked overtime and did not dare to say that he had worked three years a year. There was absolutely no problem with two and a half years."

He was silent again, looked at everyone in the conference room, and then said, "I looked at the piece counting table in the past. Among you, there are twenty pieces that can do in a day, but none of them are qualified!"

Are you dissatisfied? Maybe Master Liu’s actions are not qualified. Today, I invited Master Liu Daqiang to block your mouth!"

Liu Daqiang is over 60 years old this year and has been retired for many years. It is really not easy for Zhou Dalin to find him.

Then, he stopped quarreling with these grinders, and took Liu Daqiang and all the grinders to the workshop and asked Liu Daqiang to demonstrate on-site how to grind a pump shaft.

Liu Daqiang surrounded more than a dozen outer cylindrical grinders and debugged one by one, and finally found one with the accuracy. The rest were all done by the workers and damaged, and the accuracy did not meet the requirements.

When finding a suitable machine tool, Liu Daqiang asked several young workers to help unload the grinding wheel and find a balance rack to balance, but he couldn't find a balance rack in the workshop.

When working with an outer cylindrical grinder, you should often use a balance frame to balance the grinding wheel to prevent the unbalanced grinding wheel from causing centrifugal force and vibration during work, which not only damages the accuracy of the machine tool, but also fails to obtain a smooth workpiece surface.

There is no grinding wheel balance rack in the entire workshop, which means that all grinders have cancelled the essential step of balancing grinding wheel when working.

Zhou Dalin had a dark face and said nothing, asking everyone to find a balance frame, and finally found two in the warehouse.

After balancing the grinding wheel, the spindle clearance of the grinder was readjusted, and the spindle bouncing degree was within the allowable range with a dial. Liu Daqiang started to work and started grinding the machine tool.

It took forty minutes to finish drying a shaft, and the surface roughness, diameter, and ellipticity were all within the requirements of the drawing process.

After finishing the work, Liu Daqiang explained that one is that he has not touched the machine tool for many years and has been born, so he has worked slowly. Another is that the machine tool is made too powerful and not easy to work. Another is that the previous precision car process has left too much margin, so the precision car is not qualified, which has caused him to use too much grinding and processing.

At this time, Zhou Dalin began to get angry.

"Did you see? An old man in his sixties can do a qualified product in forty minutes, and eight hours a day, and it's okay to do more than ten pieces? What is the salary for this workpiece? If you work hard, you can earn nearly one hundred yuan a day! The average social salary is only 1,600 yuan, and you can earn 3,000 yuan a month, but you are not satisfied and think the wages are low?

Let’s see how you did it? In order to save time, I didn’t repair the grinding wheel or the unbalanced grinding wheel, I made all the equipment ruined, and I haven’t made a qualified product yet! You guys say, what’s the use of me asking you workers, what’s the use of ruining the reputation of our factory and wasting my money to play?

Starting today, this process will be suspended and rectified. Master Liu Daqiang is the leader and cooperates with the technical department’s maintenance team to restore the machine tool accuracy first.

All of you grinders can go back and consider it. If you really can't do it, you can come to me to quit your job, or ask to be transferred to other positions you think you can do it.

I'll say the ugly thing first. With your work attitude and your bad machine-pluging technology, in addition to the vacuum pump, you can tolerate you because of your old employees. You can go outside and try it. Which boss is willing to let you do this!

If you want to stay, you have to obey Master Liu's arrangements and orders. If you don't obey, you will leave your job immediately. I will never tolerate it!"

In fact, Zhou Dalin's method is very simple. In each machining process, he hired a high-tech machining man like Liu Daqiang as the squad leader with a high salary, so that this high-tech worker can supervise and train all the remaining workers, including how to correctly operate the machine tool equipment, how to sharpen the knife, feed, and use the modulus gauge. In short, without brutal operation or artificial damage to the equipment, the qualified products are produced.

Of course, there are high wages and high fines. The human-machine efficiency value of this process determines the monthly income of leading the squad leader.

In this way, we have successfully avoided the bad habit of "teaching apprentices and starving the master" in the machine-selling industry. In order to get more performance salary, we have to train all the workers under our subordinates to have their high skills and do their work quickly and well.

Workers sometimes are unreliable. Under the influence of the market economy, in order to get high wages, they rarely consider their personality in the face of money and can do everything they can do.

The grinder said it was impossible to produce qualified products, but the result was that under the supervision of Liu Daqiang, the first day after the rectification, the qualified products were produced one by one.

Zhou Dalin did it in the same way as the process. You can’t do qualified products, right? If you are not afraid of being punished, you will be ruined! If you don’t want to talk, I still have more than a thousand preparatory workers working in an agency company. There are high-tech technicians who teach them step by step, but I don’t believe it. They can’t learn how to work, and I will not do this job without you!

No one dares to quit his job.

Nowadays, it is not so easy to get a job with a high salary and pension insurance? It is forced to do this and want to learn skills and get a salary without any effort. Where is such a good thing in the world?

In three days, the processing level of the entire factory was completely renewed.

Lao Cheng saw something difficult as the sky, and Zhou Dalin just moved his mouth and solved it.

Of course, this is the management experience accumulated by Zhou Dalin in his previous life, and it is not something that an outsider like Lao Cheng can understand in a short while.
Chapter completed!