Don’t worry about scarcity, but worry about inequality.

Even if two people have a good relationship, they will have their own thoughts after being treated differently.

So Yi Chuanzong asked Liu Yuan with concern: "Your behavior is a bit abnormal. You must have performed well before you came to the 21st workshop. After a year, you should have passed the first-level fitter assessment."

Yes, it’s been two years and you still haven’t become a regular employee?”

Liu Yuan said awkwardly: "I haven't passed the first-level fitter assessment yet!"

Yi Chuanzong frowned and asked, "Where did you fail?"

Hearing this question, Liu Yuan's face became even more embarrassed, "I can operate the machine tool fairly well, but I'm a little worse at hands-on skills. I'm not very good at carving. Please forgive me for any shortcomings."

Liu Yuan was still a little afraid that Yi Chuanzong would wear small shoes for him, and now he was very soft-spoken when he was angry.

Now that he and Han Xiang have been assigned, they may have to work with Yi Chuanzong from now on. There will be more places to put in effort among the fitters. If you offend the master, it is normal to be exhausted every day.

Yi Chuanzong nodded. He had already talked with the master in the workshop before. He knew everything about Liu Yuan and Han Xiang, so he asked this deliberately now.

Liu Yuan usually works with Han Xiang, but Liu Yuan came later.

Han Xiang had been working here for almost two years when Liu Yuancai just came to Eryi Workshop.

By the time Liu Yuan arrived, Han Xiang had already mastered even the more laborious carving.

Having learned everything, Han Xiang would certainly not do such strenuous work again. He gave things to Director Qian and asked the workshop director to arrange something relaxing for him when he usually arranged work.

Director Qian gave them all, and along with his Master Chang, Han Xiang naturally gave some gifts as well.

This gift was indeed not given in vain. Seeing that Han Xiang was so discerning, Director Qian and Master Chang took into account his physical problems and let Han Xiang do as easy a job as possible.

This is definitely a good thing for Han Xiang, but it is not good for Liu Yuan.

If you don't do enough work, you won't be able to count, and you won't be able to pass the technical test.

Thinking of this, Yi Chuanzong turned his head and looked at Han Xiang. This guy had relaxed himself and harmed others who were working together.

If you can make money by working hard, who doesn't want to make more money? Should you eat steamed buns first, or should you eat meat because it doesn't taste good?

As soon as Han Xiang placed the motor case on the iron table, he raised his head and found Yi Chuanzong looking at him. After looking at each other for a second, he quickly lowered his head.

Yi Chuanzong still ignored him, turned around and said to Liu Yuan with a warm face: "The reason why you failed the assessment may be because you have developed bad habits in the past. Now I will take a closer look at your technique of holding a chisel knife.

and percussive gestures.”

With that said, Yi Chuanzong opened the vise, and then easily clamped the motor case inside. Later, he would have to use a chisel to hit it with a hammer. If it was not fixed, it would fall apart if it was smashed. How could there be any accuracy?

Liu Yuan took this to heart.

Even if you are an ordinary formal worker, your salary is thirty-three yuan a month. The third year of an apprenticeship is twenty-seven and a half yuan. The difference is five yuan a month, and it is sixty-six yuan a year!

With so much money, how could he have no idea in his mind? When buying meat, he can buy eight or nine kilograms. If he buys those kinds of ribs or pork offal, it only costs 50 cents per kilogram at most. Sixty-six yuan can buy thirteen or four kilograms!

The way he looked at Han Xiang changed slightly. When he first arrived, the master made arrangements, and then the two of them started working.

It would be okay if both of them were novices, but I am afraid that if both of them are apprentices, one old and one new, the master would be too lazy to teach, and the old apprentice’s way of working may not be accurate. How could the newcomer not learn from the mistakes?

Yi Chuanzong turned his head and glanced at him. Liu Yuan was still dazed at the moment. He must have figured out something.

But his plan to alienate people must not be seen by others. It is enough to let Liu Yuan think about it for half of the words. He wants to understand the most profoundly, and his attitude towards Liu Yuan cannot be too gentle.

So Yi Chuanzong shouted softly, "What's going on? Are you in a daze while you watch me install the motor casing? Chiseling is a test of technique. Do you still need me to teach you about this installation?"

Liu Yuan came to his senses immediately and apologized repeatedly: "I'm sorry, Master Yi, I was distracted!"

He quickly lowered his head and opened the vise beside him. This thing was pushed by a large screw.

When the screw is turned clockwise, it goes inward, but the screw in this vise does not move. What moves is the movable iron clamp on the outside. As the screw goes in, the distance between the two becomes closer. When the iron clamp moves out, the tiger's mouth becomes closer.

opened.

Turn it counterclockwise to move inward, and the tiger's mouth of the two iron plates will close to clamp the workpiece.

Liu Yuan's hurried movements were like doing homework in class. When the teacher came, he felt nervous. In addition to respect, he was majestic.

Yi Chuanzong raised a smile on his lips and turned to look at Han Xiang.

He was still sullen and silent, moving the motor casing. It was not easy for ordinary people to carry this forty kilogram weight. He was out of breath after only four moves.

Let him sneak around for a while and collect some interest!

"Master Yi, I have installed it!"

Liu Yuan raised his head and smiled with a pure smile, and his reporting voice was very clear. He felt that he could learn something here and it would make him energetic to work.

You have to be sincere in everything you learn and maintain a good attitude. Many people nowadays are simple and honest. Yi Chuanzong is very satisfied with his appearance.

Yi Chuanzong waved his hand to Liu Yuan and told him to look closer. Then he bent down and inserted the steel ruler in his hand into the cylindrical hole of the motor case.

Naturally, Liu Yuan hurriedly bent down and listened carefully. This person who could become a level four fitter in a month must have mastered these tricks. He is lucky to learn them!

Once the skills are in place, he can become a full-time employee. There is a gap of more than 60 yuan, so how dare he be careless?

Yi Chuanzong began to teach seriously, "It is difficult to open the inner groove of the motor casing, but you have to understand why it is difficult! Because it is cast in one piece, it is difficult for current machines to make grooves inside, so it can only be made by

It is done manually. But this slot is not like the heat dissipation slot outside, the slot inside is used to install the coil clamp!"

"No matter how complicated it is, you won't understand it. It's a whole set of physical reactions. What we do is to reduce this error so that the entire motor can run perfectly. This is related to the efficiency of the machine, its service life, and the maintenance intervals.

, is a very serious job.”

"The machine cannot be used, so manual work is used, so the requirements are so high. First, we start with marking, which is the first step to determine the accuracy! According to each person's habits, the way of marking is slightly different.

You watch me first, and I will correct you later when I watch you work!"

After saying that, Yi Chuanzong started to draw lines on the inner side of the motor's inner shell at full speed, explaining each step in the middle. As soon as the ruler was released, the chisel left a straight silver line inside the workpiece.

"Now that the marking is complete, we can start to do it. I don't know your habit of holding the knife and beating. You can watch me do two first, and then we will follow the steps one by one."

"Listen carefully. When I do it, remember the essentials of every step. First know how I do it, why I do it, and how to do it well. Then you will have an idea in your mind when you work!"

When it came time to play with the hammer, a smile appeared on Yi Chuanzong's face.

He just likes this job. It can exercise his body and make money. He has a sense of accomplishment in every craftsmanship. The higher the precision, the greater the sense of accomplishment!

"Dang! Dang! Dang!"

The crisp and rapid sound of hammering spread in the workshop. Although the sound was not as loud as the steel plate, the perfect rhythm was still very pleasant to the ears.

Master Li next to him turned his head. He had paid attention to this side before, but now after taking a look, he had a confused expression on his face.

From his perspective, Yi Chuanzong's chiseling method was just a series of random knocks. The shadow of the hammer could be seen with this small hammer. How fast was it hitting?

Liu Yuan next to him had a big mouth. In fact, he seemed to be knocking randomly, but when he was knocking slowly before, Yi Chuanzong explained it to him.

Every change of the hammer has a certain reason in it. He can barely understand the principle and operation of a single step, but when combined, even such a fast strike, it is not as simple as analysis and understanding.

Every hammer blow is a display of peak skills!

A kind of admiration suddenly arose in his heart. Such skills are not available to ordinary people. At least they must be old fitters who have been doing this for more than 20 years. They have often done this and have become extremely familiar with it.

It feels like it’s complete. Canyon

Nowadays, a newly promoted fitter master can achieve this level of perfection and practice every extremely demanding movement to perfection. This is a skill! People have to admire it!

Liu Yuan looked at Yi Chuanzong as if he were a god, and his admiration was beyond words.

Clang clang clang!

The sound was slightly crisp, and after a series of blows, there was a pause of less than ten seconds before the crisp sound sounded again.

Four grooves need to be opened inside the motor case. The end of each sound means that Yi Chuanzong loosens the motor case and changes the direction.

Hearing this urgent sound, Han Xiang is in pain now!

He had heard this sound before during the fitter assessment. Now this sound came again. It was a familiar and heartbreaking memory!

He almost succeeded!

It's a pity that he failed!

Now I can only pant and carry the motor casings. Eighteen motor casings, each weighing forty pounds, are carried back and forth non-stop.

"The number of tasks in the workshop can be completed at most fifty in a day. I only need to carry another thirty. He will not arrange for me to carry this in the future!"

Han Xiang kept comforting himself in his heart and moved all the workpieces up. He pushed the cart and was about to leave, but when he saw Liu Yuan who was just standing aside, he felt very envious.

Although he hated Yi Chuanzong in his heart, he had to admit Yi Chuanzong's skills. If there were other masters who had the secret of doing work, he would definitely prick up his ears and listen carefully.

But he had reported Yi Chuanzong, and it was too late for the other party to hate him, so how could he possibly teach him.

Just now, he was still working hard to move the workpieces. He didn't listen very carefully to what Yi Chuanzong said, but he also gained something.

Now he just wants to transport all the motor casings back quickly, and then come back to experiment. He is very proud of being able to secretly learn the skills from Yi Chuanzong.

The hammering stopped, and Yi Chuanzong finished processing a motor case. He glanced outside in a blink of an eye. Now that Han Xiang had left, he had to start working faster!

"Go to the vise on the opposite side and mark a line yourself. I'm going to be very careful here. After you've finished marking, measure it again and again, and then try to chisel it. Control your strength. It's okay if it's a small spot, but it won't be a big chisel."

Liu Yuan nodded seriously, "I understand, Master Yi, I will definitely be careful."

At this time, Master Li turned around and joked: "Master Xiao Yi, you are not very fast either!"

Yi Chuanzong raised his head and replied happily: "Don't worry, I just gave you a brief lesson before, please take a look again!"
To be continued...